Ac Dc 9-30v Remote Garage Door Receiver 2 Channel Door Control Receiver Compatible For Rx Multi 300-868mhz Universal White

Name: Universal RX MULTI Receiver;
Working voltage: AC/DC 9V-30V;
Channel: 2;
Frequency: 300MHz-868MHZ;
Code: rolling and fixed code & learning code;
Distance: 50-100 meters;
Size: 56 x 46 x 20mm;
Power input selector: This receiver can work under AC/DC 9V~30V. However, it is better to change the PIS according to the power input. If the input is greater than 24V, shorten pins 2 and 3; if the input is less than 24V, shorten 1 & 2;
Working frequency: 300MHz～868MHz (rolling code, fixed code, learning code), can identify all fixed codes (2262, 2260, 2264, 5326, M1E, M5E, etc.). All learning codes (1527, 2240, 6P20B, 6P20D, etc.) rolling codes (HCS301, HCS300, HCS200, HCS201, HCS100, HCS101, etc.);
To program a new remote: 1) Select the correct brand for the remote you want to program by moving the tilt switch up or down. For 433,92Mhz rolling code remote control, just move the DIP switch 5 up. (manual included) 2) Press the learn button. Turn the LED on. 3) Press the button on the remote control, the LED flashes 4 times. This means the remote was programmed successfully. 4) Repeat step 2 for the other button. 4. Same procedure for channel 2 programming. 4. Clear all data in the memory card: press and hold any learning button. The LED will start blinking. Press and hold this button until the LED turns off. All data saved in the memory card will be permanently erased and cannot be recovered;
Packing list:
1 x Receiver
1 x Antenna
1 x Manual
1 x Packing Box
Note:
1. Due to manual measurement, please allow 1-3cm error. Make sure you don’t mind before bidding.
2. Due to the difference of different monitors, the picture may not reflect the actual color of the product. Thanks.